Showing 1–12 of 50 results
The K170 buffing wheel with a diameter of Ø 32 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK 1 for flexible shaft (cat….
The K170 buffing wheel with a diameter of Ø 4 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for a 595-4034 drill chuck or an NV 11 hexagonal tool holder with a 3/8″ thread – 24 (cat. No. 519-6610).
10 mm cutter for HM-ECO drillApplicationThe Hartmetal cutter with a diameter of 10 mm and an overall length of 110 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. Its use allows the removal of steel belting from the damaged spot…
Intended Use The Hartmetal cutter with a diameter of 12 mm and an overall length of 110 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. With this device, we can remove steel belting from the damaged spot in the tyre…
4.5 mm cutter for HM-ECO drill Application The Hartmetal cutter with a diameter of 4.5 mm and an overall length of 80 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. Length of working part: 50 mm. Its use allows the…
8 mm cutter for HM-ECO drill Application The Hartmetal cutter with a diameter of 8 mm and an overall length of 105 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. Length of working part: 60 mm. Its use allows the…
The ES 45 K40 buffing band with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 45 buffing tool (cat. No. 595-5507). Recommended max. speed 2,800…
The ES 45 K60 buffing band with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 45 buffing tool (cat. No. 595-5507) Recommended max. speed 2,800…
The ES 45 buffing tool with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Recommended max. speed 2,800 rpm. Suitable for use with a 6 mm drill chuck and…
The ES 75 K60 buffing band with a diameter of Ø 75 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 75 buffing tool (cat. No. 595-5552). Recommended max. speed 2,800…
The ES 75 buffing band with a diameter of Ø 75 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 2,800 rpm. Suitable for use with an 8 mm drill chuck…
3 mm cutter for HM-ECO drill Application The Hartmetal cutter with a diameter of 3 mm and an overall length of 60 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. Length of working part: 30 mm. Its use allows the…
End of content
End of content
Ostukorvis ei ole tooteid.