Kummist ketas liimijääkide eemaldamiseks

The rubber disk is designed to remove adhesive tape residues and other dirt from rims left by glued weights. The product includes an adapter that allows for quick attachment of the disk to a low-speed device. The disk ensures quick and safe cleaning and preparation of the rim for the installation of a new weight. Its special butterfly design increases the pressure force, making it faster to remove dirt. The well-chosen high-quality rubber compound used in the disk does not damage the surface, does not scratch, and does not leave marks on the cleaned surfaces. Using the disk in the cleaning process allows for the quick removal of stubborn dirt. The disk can be used with the CP 887C drill, the CP 873 low-speed grinder, and the PXA72 cordless drill. The maximum rotational speed of the disk is 4000 RPM. It should be noted that if you want to use the disk with the CP873 grinder, which has a clamping handle, you need to additionally install a tool holder, e.g., 519-6672. Quick and Safe Thanks to the adapter included with the disk, mounting it on the device is very efficient. The rim cleaning process takes only a moment and is very thorough. The well-chosen rubber compound does not damage the surface, does not scratch, and does not leave marks on the cleaned surfaces. The disk should be used parallel to the cleaned surface. Do not use the disk at an angle. Also, do not press the disk too hard against the cleaned surface. Low-speed devices should be used in the process. Perfect Cleanliness After using the disk, the cleaned surfaces remain clean and smooth, and the new weight adheres more firmly to the rim. Savings The disk perfectly removes dirt from the cleaned surface, eliminating the need for additional tools or other chemical agents. This saves not only time but also money. Application Cleaning aluminum rims from adhesive weight residues and dirt from the bodywork.