Kaabitsad
2,88 €The flat and curved surface scraper enables pre-cleaning of the inside and outside of the tyre.
Showing 1–12 of 20 results
-
-
Kookoskiust harja
3,70 €The coconut fibre brush enables the safe removal of rubber abrasion from the roughened rubber of the tyre. The wooden handle is fitted with coconut fibre bristles, which are especially durable, meaning that they do not become stiff, bent or separated, even after intensive use. Particularly suitable for cleaning flat surfaces in workshops and for…
-
Laagriga plaasteroller, läbimõõt 35 mm x 4 mm – rehviparandus
2,92 €The roller, with a width of 4 mm and a diameter of 35 mm, is an indispensable tool in the process of repairing tires and inner tubes. Purpose Its main function is to perform mechanical pressure, necessary for proper adhesion of patches to rubber surfaces. Thanks to the wavy surface of the roller, pressure is…
-
Laagrirull, 12 mm
16,72 €The 4 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat surface. It enables performing mechanical pressure appropriate to the type of the applied material. It is mainly designed for pressing patches during tyre or inner tube repairs. The large wooden handle guarantees years of durability…
-
Laagrirull, 4mm
16,98 €The 4 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat surface. It enables performing mechanical pressure appropriate to the type of the applied material. It is mainly designed for pressing patches during tyre or inner tube repairs. The large wooden handle guarantees years of durability…
-
Messingist harja
16,16 €The brass brush is designed for cleaning mechanically roughened surfaces from the finest particles of rubber abrasion. It is designed for gentle cleaning of the roughened surface.
-
Mini pöörlev freespinkler puuridele, Ø 30 mm
54,70 €The rotary gouge with a diameter of Ø 30 mm is designed for removing large amounts of rubber from the damaged outside areas of lorry, oversized and agricultural vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with a 8 mm drill chuck (cat. No. 595-4034) or NV 11 hexagonal tool holder with a…
-
NV11 Tööriistahoidja (varre), 3/8″ x 12 mm keermega tööriistadele
36,06 €NV 11 hex tool holder with 3/8″ – 24 thread allows the tool to be held securely in place during the tyre repair process using a device suitable for the speed ranges. It is designed for hex shank tools with a 3/8″ thread or hole.
-
NV11 Tööriistahoidja (varre), 6 mm varrega tööriistadele
40,86 €Hex tool holder allows the tool to be securely clamped during the tyre repair process using a device suitable for the speed ranges with quick-release It is designed for hex shank tools with a 6 mm shank.
-
NV11 Tööriistahoidja (varre), 8 mm varrega tööriistadele
38,80 €Hex tool holder allows the tool to be securely clamped during the tyre repair process using a device suitable for the speed ranges with quick-releas. It is designed for hex shank tools with an 8 mm shank.
-
NV11 Tööriistahoidja (varre), M14 x 11 mm, tööriistade jaoks Ø 76 mm + Ø 102 mm
23,20 €M14 x 11 mm hex tool holder is a shank that allows the tool to be securely clamped during the tyre repair process using a device suitable for the speed ranges with quick-release. It is designed for tools with a hex shank with a hole of 14 mm and a clamping thickness of max. 4…
-
NV11 Tööriistahoidja (varre), M14 x 18 mm
39,94 €M14 x 18 mm hex tool holder is a shank that allows the tool to be securely clamped during the tyre repair process using a device suitable for the speed ranges with quick-release. It is designed for tools with hexagonal shank with M14 thread, particularly the Ø 76 x 20 PVC wire brush with 14…
End of content
End of content