Showing 1–12 of 27 results
The K170 buffing wheel with a diameter of Ø 32 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK 1 for flexible shaft (cat….
The K170 buffing wheel with a diameter of Ø 4 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for a 595-4034 drill chuck or an NV 11 hexagonal tool holder with a 3/8″ thread – 24 (cat. No. 519-6610).
The ES 45 K40 buffing band with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 45 buffing tool (cat. No. 595-5507). Recommended max. speed 2,800…
The ES 45 K60 buffing band with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 45 buffing tool (cat. No. 595-5507) Recommended max. speed 2,800…
The ES 45 buffing tool with a diameter of Ø 45 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Recommended max. speed 2,800 rpm. Suitable for use with a 6 mm drill chuck and…
The ES 75 K60 buffing band with a diameter of Ø 75 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of passenger car and lorry tyres. Suitable for the ES 75 buffing tool (cat. No. 595-5552). Recommended max. speed 2,800…
The ES 75 buffing band with a diameter of Ø 75 x 30 mm is designed for the removal of outflows, which occur during cosmetic work on vulcanised spots in thermopresses on the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 2,800 rpm. Suitable for use with an 8 mm drill chuck…
The K18 buffing wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
The K36 cup wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
A flap wheel designed to remove outflows during the cosmetic treatment of vulcanized places in thermopresses. rotational speed: max. 2800 rpmsize: 60 x 30 mmgrain: K80tool holder: 6 mmquick coupling: 519-6672
The K18 rotor saw with a diameter of Ø 50 x 13 mm and a thread of 3/8″ is designed for roughening the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour…
The K18 chip cone with a diameter of Ø 25 x 102 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: – 595-4034 drill chuck, – NV 11 hexagonal tool holder with 3/8″ thread – 24…
End of content
End of content
Ostukorvis ei ole tooteid.