Showing 193–204 of 217 results
Digital depth gauge with measuring range 0 – 50 mm is designed to measure the depth of tread in tyres of passenger cars, lorries and agricultural vehicles. The depth gauge can be used in any work area and can be carried to where the tyre is located. Multi-purpose depth gauge suitable for any workshop. Convenient…
The probe is used to pull the SUPER SEALASTIC and SUPER RAS plugs for passenger car tyres. It is used for emergency repairs without removing the tyre from the rim.
A cylindrical steel brush with a diameter of Ø 76 x 20 mm and a bore of 14 mm is intended for roughening rubber on the inner side of all types of tyres.Recommended max. speed 2,800 rpm. A perfect solution for visible steel cord lines in all-steel truck tyres and textile cords. Suitable for: 8…
The steel brush with a diameter of Ø 60 x 20 mm is designed for roughening rubber on the outside and inside of all types of tyres. Recommended max. speed 2,800 rpm. Ideal for visible steel cord cables in all-steel lorry tyres and textile cords in agricultural tyres. Suitable for use with a 6 mm…
The Hartmetal cutter Ø 6 x 50 mm is a very durable cutter designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The specially adapted profile also enables the removal of damaged lines of steel cord. The Ø 6 x 65 mm cutter is designed…
The Hartmetal cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 6 x 90 mm cutter is designed for use on the outside and inside of passenger car, lorry, agricultural and oversized vehicle tyres. The maximum speed for…
The Ø 55 x 8 mm brass brush is designed for roughening rubber on the outside and inside of all types of tyres. Recommended max. speed 2,800 rpm. Ideal for visible steel cord cables in all-steel lorry tyres and textile cords in agricultural twill tyres. Suitable for use with a 6 mm drill chuck and…
The K46 buffing wheel with a diameter of Ø 65 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 24mm 3/8″ thread (cat. No. 519-6627), arbour MK 1 for flexible…
PREMA Ultra Fast Dry Vulcanizing Cement can 237 ml is formulated to provide outstanding performance when used in conjunction with PREMA repair materials.Extremely easy to apply with an outstanding drying time.Regard Minimum drying time and test with the back of the finger independent of room temperature and humidity. Prema vulcanizing fluid for both cold and…
Designed for checking the tightness of inner tubes and tyres, which are immersed in water by means of a pneumatic actuator. The lightweight container is made of plastic – it can be easily removed or tilted for washing. The bottom of the tank is fitted with a drain valve. The clamping device is equipped with…
The K170 buffing wheel with a diameter of Ø 65 mm and a 3/8″ thread is designed for roughening the inside of lorry, agricultural and oversized tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 24mm 3/8″ thread (cat. No. 519-6627), arbour MK 1…
The tools included in the repair kit are a complete set for treating damage in all areas of passenger and delivery van tyres. This type of damage requires hot vulcanisation in thermopresses. Intended for working on the outside of passenger car and lorry tyres. The set consists of a cone, ring, pencil rasp and buffing…
End of content
End of content
Ostukorvis ei ole tooteid.