Showing 49–60 of 218 results
The Hartmetal cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 8 x 100 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The maximum speed for damage hole…
The Hartmetal Ø 10 x 110 mm cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 10 x 110 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The…
The Hartmetal cutter Ø 12 x 110 mm is a very durable cutter designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 12 x 110 mm cutter is designed for using outside and inside of truck, agricultural and large tyres. The maximum speed…
The Hartmetal Ø 4.5 x 90 mm cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 4.5 x 90 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The…
The Hartmetal cutter Ø 3 x 50 mm is a very durable cutter designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The specially adapted profile also enables the removal of damaged lines of steel cord. The Ø 3 x 50 mm cutter is designed…
PREMA ensures the high quality of its products by implementing strict controls from raw material supply to product launch. PREMA line products guarantee reliable quality at favourable prices. They are designed on the basis of approved European quality standards and all products are subjected to strict quality control before shipment. Advantages of the PREMA range…
The K18 buffing wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
The K36 cup wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
A flap wheel designed to remove outflows during the cosmetic treatment of vulcanized places in thermopresses. rotational speed: max. 2800 rpmsize: 60 x 30 mmgrain: K80tool holder: 6 mmquick coupling: 519-6672
The K18 rotor saw with a diameter of Ø 50 x 13 mm and a thread of 3/8″ is designed for roughening the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour…
The flat and curved surface scraper enables pre-cleaning of the inside and outside of the tyre.
Hand reamer tool with a diameter of Ø 6 mm is intended for cleaning the hole resulting from tyre damage. It removes rubber and steel cord from damaged areas preparing the damage for repair.
End of content
End of content
40-58mm koonus tasakaalustuspingile
1 × 9,99 € 
SP 4 - V1.05.1 klapp
2 × 1,46 € 
SW 2 30x73/40 klapp
1 × 2,72 € 
Metallkork A - V9.04.4
1 × 0,16 € 
Zawór TR 438 motocyklowy - V2.03.5
1 × 0,28 € Valuvelje 45g löödavad tasakaaluraskused
1 × 16 € 
TR 414 - L - V2.03.8 klapp
1 × 32,96 € 
Pruunid paksud remondimaterjalid reisijateveo rehvidele 100x6 mm, 50 tk
1 × 7,48 € 
SW 2 30x35/40 klapp
1 × 3,58 € 
Klapp SW 1 90° x 138 mm
1 × 3,88 € Vahesumma: 79,97 €