Showing 61–72 of 218 results
The K18 chip cone with a diameter of Ø 25 x 102 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: – 595-4034 drill chuck, – NV 11 hexagonal tool holder with 3/8″ thread – 24…
The Ø 32 x 6 mm stone is designed for machining steel cord during tyre repair. The Ø 32 x 6 mm stone has a specially profiled ring-shaped tip and is intended for use on the outside of passenger car, lorry, agricultural and oversized tyres. Maximum speed: 25,000 rpm. Suitable for use with a 6…
The coconut fibre brush enables the safe removal of rubber abrasion from the roughened rubber of the tyre. The wooden handle is fitted with coconut fibre bristles, which are especially durable, meaning that they do not become stiff, bent or separated, even after intensive use. Particularly suitable for cleaning flat surfaces in workshops and for…
Replacement insertion tool needle for 4-in-1 kit for emergency repair of radial and bias-ply tyres using cords. The insertion tool is designed for pulling the cords in the tyre for quick wheel repair without removing the tyre from the rim.
The roller, with a width of 4 mm and a diameter of 35 mm, is an indispensable tool in the process of repairing tires and inner tubes. Purpose Its main function is to perform mechanical pressure, necessary for proper adhesion of patches to rubber surfaces. Thanks to the wavy surface of the roller, pressure is…
The 4 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat surface. It enables performing mechanical pressure appropriate to the type of the applied material. It is mainly designed for pressing patches during tyre or inner tube repairs. The large wooden handle guarantees years of durability…
The 4 mm wide bearing roller with a diameter of 35 mm makes up a pressure roller with a flat surface. It enables performing mechanical pressure appropriate to the type of the applied material. It is mainly designed for pressing patches during tyre or inner tube repairs. The large wooden handle guarantees years of durability…
The K18 chip cone with a diameter of Ø 20 x 38 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
The K18 chip cone with a diameter of Ø 25 x 50 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
A workbench-mountable tyre and inner tube repair stand. It is designed for spreading the beads when inspecting the inside of a tyre and for performing tyre repairs. A spreader / expander makes it easier to repair tyres of passenger and van tyres. The spreader has a plastic lever which makes it possible to press and…
The spreaders are used to spread the beads when inspecting the inside of the tyre and performing tyre repairs. Intended for the repair of motorbike, passenger car and delivery van tyres They provide quick and easy access to the inside of the tyre, which significantly speeds up work. The proposed product does not require special…
A workbench-mountable tyre and inner tube repair stand. It is designed for spreading the beads when inspecting the inside of a tyre and for performing tyre repairs. A spreader / expander makes it easier to repair tyres of passenger and van tyres. The spreader has a plastic lever which makes it possible to press and…
End of content
End of content
40-58mm koonus tasakaalustuspingile
1 × 9,99 € 
SP 4 - V1.05.1 klapp
2 × 1,46 € 
SW 2 30x73/40 klapp
1 × 2,72 € 
Metallkork A - V9.04.4
1 × 0,16 € 
Zawór TR 438 motocyklowy - V2.03.5
1 × 0,28 € Valuvelje 45g löödavad tasakaaluraskused
1 × 16 € 
TR 414 - L - V2.03.8 klapp
1 × 32,96 € 
Pruunid paksud remondimaterjalid reisijateveo rehvidele 100x6 mm, 50 tk
1 × 7,48 € 
SW 2 30x35/40 klapp
1 × 3,58 € 
Klapp SW 1 90° x 138 mm
1 × 3,88 € Vahesumma: 79,97 €