Showing 13–24 of 50 results
The Hartmetal cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 8 x 100 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The maximum speed for damage hole…
The Hartmetal Ø 10 x 110 mm cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 10 x 110 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The…
The Hartmetal cutter Ø 12 x 110 mm is a very durable cutter designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 12 x 110 mm cutter is designed for using outside and inside of truck, agricultural and large tyres. The maximum speed…
The Hartmetal Ø 4.5 x 90 mm cutters are highly durable cutters designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The Ø 4.5 x 90 mm cutter is designed for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. The…
The Hartmetal cutter Ø 3 x 50 mm is a very durable cutter designed to calibrate the damage hole in the case of tyre punctures during repairs with Minicombi or Remast inserts. The specially adapted profile also enables the removal of damaged lines of steel cord. The Ø 3 x 50 mm cutter is designed…
The K18 buffing wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
The K36 cup wheel with a diameter of Ø 76 mm and 14 mm hole is designed for roughening the inside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 11mm M14 thread, (cat. No. 519-6634) Arbour MK…
A flap wheel designed to remove outflows during the cosmetic treatment of vulcanized places in thermopresses. rotational speed: max. 2800 rpmsize: 60 x 30 mmgrain: K80tool holder: 6 mmquick coupling: 519-6672
The K18 rotor saw with a diameter of Ø 50 x 13 mm and a thread of 3/8″ is designed for roughening the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour…
The K18 chip cone with a diameter of Ø 25 x 102 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: – 595-4034 drill chuck, – NV 11 hexagonal tool holder with 3/8″ thread – 24…
The Ø 32 x 6 mm stone is designed for machining steel cord during tyre repair. The Ø 32 x 6 mm stone has a specially profiled ring-shaped tip and is intended for use on the outside of passenger car, lorry, agricultural and oversized tyres. Maximum speed: 25,000 rpm. Suitable for use with a 6…
The K18 chip cone with a diameter of Ø 20 x 38 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
End of content
End of content
Ostukorvis ei ole tooteid.