Showing 25–36 of 50 results
The K18 chip cone with a diameter of Ø 25 x 50 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
The Pumice stone is designed for machining rubber on the inside of passenger car and lorry tyres. It is the most popular tool for machining rubber. It has a form of a ball mounted on a metal shank which allows the grinding wheel to be mounted on grinding machines and drills equipped with a quick-action…
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8″ thread is designed for roughening the inside and outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK…
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8″ thread is designed for roughening the inside and outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK…
The Ø 20 mm stone is suitable for machining steel cord during tyre repair. The Ø 20 mm stone has a specially ball-shaped tip, designed for use on the outside of passenger car, lorry, agricultural and oversized vehicle tyres. Maximum speed: 25,000 rpm. Suitable for use with a 6 mm drill chuck and an NV…
6 mm cutter for HM-ECO drill Application The Hartmetal cutter with a diameter of 6 mm and an overall length of 90 mm is designed for precise damage treatment and calibration (cleaning and enlarging) of the hole in the case of a radial tyre puncture. Length of working part: 55 mm. Its use allows the…
Spherical grinding wheel Pumice 40mm for rubber surface treatment. This tool is ideal for working on car tires. Pumice is a natural material with porous properties that allows a gentle but effective preparing the surface. This tool is used to treat the rubber inside tires of cars and trucks, ensuring perfect surface preparation. The metal…
K18 pencil rasp with a diameter of Ø 5 – 8 x 105mm designed for roughening rubber on the outside of passenger car and lorry tyres. Recommended max. speed 4,500 rpm. Suitable for: – 6 mm drill chuck, – NV 11 hexagonal tool holder (cat. No. 519-6672) – arbour MK 1 for flexible shaft (cat….
The Ø 14 x 45 mm stone is designed for machining steel cord during tyre repair. The Ø 14 x 45 mm stone has a specially profiled cone-shaped tip for use on the outside and inside of passenger car, delivery van, agricultural and oversized vehicle tyres. Maximum speed: 25,000 rpm. Suitable for use with a…
The Ø 20 x 65 mm stone is suitable for machining steel cord during tyre repair. It has a specially shaped conical tip. It is suitable for use on the outside of passenger car, lorry, agricultural and oversized vehicle tyres. Maximum speed: 25 000 rpm. Suitable for use with a 6 mm drill chuck and…
The Ø 50 x 10 mm stone is designed for machining steel cord during tyre repair. The Ø 50 x 10 mm stone has a specially profiled ring-shaped tip for use on the outside and inside of lorry, agricultural and oversized vehicle tyres. Maximum speed: 25,000 rpm. Suitable for use with a 6 mm drill…
The Ø 7 x 25 mm stone is suitable for machining steel cord during tyre repair. The Ø 7 x 25 mm stone has a specially profiled cone-shaped tip and is intended for use on the outside of passenger car, delivery van, agricultural and oversized vehicle tyres. Maximum speed: 25,000 rpm. Suitable for use with…
End of content
End of content
Ostukorvis ei ole tooteid.