Colormatic sõiduki laternate remondikomplekt

Vehicle headlamps primarily serve a useful function by ensuring adequate visibility, but they can also be an integral part of a vehicle’s styling, giving it an individual touch. Over time, lamps, especially polycarbonate lamps, become tarnished, leading to decreased safety. For such situations, it is a good idea to have a professional vehicle lamp repair kit on hand, such as the one offered by our online store. It will remove not only tarnishing, but also scratches and damage. A vehicle lamp repair kit is very easy to use. The entire procedure takes just a few steps: Step 1 – Sanding. Using the P800 wet sandpaper, polish the surface of the lamp until all yellowing disappears completely. Then sand using the 2000 paper. Step 2 – Covering and cleaning. Cover the area around the lamp with masking paper, then clean the lamp using CM Plastic Cleaner. Remove the water left by sanding with a cloth. Step 3 – Primer. Apply a plastic primer (included in the vehicle lamp repair kit) in thin coats. Approx. 10 minutes after drying, you can apply the clear coat. Step 4 – 2k coat. Before applying the clear coat, activate the second component. To do this, remove the inner ring from the protective cap and place it in the pin, and then pull the pin with your finger and rotate it 360°. After shaking, the coat is ready to use. Step 5 – Painting. Apply one or two coats of paint with 2k hardener on the lamp. The paint is fully dry approx. 7 hours after application. The kit includes: ColorMatic 2K clear coat, high gloss, 200 ml (index: MT187216) ColorMatic plastic cleaner, 150 ml (index: MT368486) ColorMatic plastic primer, 150 ml (index: MT359347) Instruction manual