Sõiduauto rehvilaotur koos alusega, kallutatav

Ergonomic tyre spreader with mobile working platform. Application The spreader with base for repairing tyres is an indispensable tool for every vulcanisation workshop. It allows for inspection and repair of passenger tyres in any damage zone, thanks to a five-stage tilt angle adjustment. The stability of the device is ensured with a base, which has holes for fastening it to the floor. Thanks to its size, the manual tyre spreader with base takes up little space in the workshop while giving the worker full access to the tyre from both the inside, when repairing the inner layer, and the outside, when inspecting the tread, sidewall or shoulder area. The spreader comes with a practical tool shelf measuring 255 x 155 mm which is mounted on the column of the spreader, enabling keeping the necessary tools at hand in the work area. Design The spreader is a welded construction, made of powder-coated steel. The working platform is placed at 84 cm, for comfortable work in a standing position. Ergonomic work is ensured by the possibility of tilting and rotating the tyre. Handling To fix a tyre on the device, select a hook placement suited to its width. The device allows you to choose from 5 span widths. The placement of the spreader hooks is adjustable on both sides. On one side, the hooks are mounted on a sliding shaft with 5 locking positions, and the movement is made easier by a locking handle installed under the shaft. The hooks at the other end of the platform can be mounted in one of the three available mounting slots. The mobile platform, on which the tyre is fixed, is equipped with 2 rotating rollers which make it easier to work with the tyre by enabling it to rotate freely as needed. The design of the spreader allows you to tilt the platform by pressing the spring tension pedal with your foot, which releases the tilt lock. Once the platform has been set to the desired angle, simply release the pedal and the locking bolt will enter one of the locking holes. The mobile working platform allows you to handle the tyre at one of five possible angles – from a horizontal position up to 90 degrees. Advantages spreader with base tilt angle adjustment – 4 stages of angle adjustment for working on the tyre, change of angle by pressing the pedal (spring) vertical and horizontal operating range possibility to fasten it to the floor tyre fixing adjustement range in terms of width ergonomics, convenience, simplicity tyre grip lock