Kolbkompressor INVENTO 475, 200 l, 10 bar, 3 kW

INVENTO INV475 oil reciprocating compressor, one-stage, double-piston with belt drive. An advantage of this model is the motor connected to the compressor unit via a belt transmission, thanks to which the compressor achieves a lower rotation speed on the unit. The in-line arrangement of two pistons placed in one cylinder enables alternate pumping. In addition, the pistons are sealed with three sealing rings, which significantly reduces the possibility of contaminating the air with oil. The compressor’s long service life and durability are guaranteed by a cast-iron cylinder, which also provides efficient cooling. The INV475 model is equipped with wheels and a handle which makes it mobile. Its advantages include easy control of the oil level through the sight glass, automatic operation thanks to a built-in pressure switch that guarantees automatic start of the compressor at minimum pressure and compressor shutdown when the pressure exceeds the maximum level. Standard equipment: Electric connection cable 400V/50Hz, Filter with regulator, pressure gauge and 2 quick couplings, Relief valve to protect the motor against overload, Pressure switch, Valve for easy drainage of the tank, Tank equipped with wheels and a handle, Motor, Pump, Tank certificate, Safety valve certificate, User manual. A reciprocating compressor is still the most common type of compressor. The operating element, in this case, is a piston, which, by performing the reciprocating motion causes suction of gas and in the effect compression. The pressure generated by the piston is 10 bars. This type of compressor operates to some extent limit, the rule is the time 50/50. This means that the compressor is not designed for continuous operation. Therefore, reciprocating compressors are very popular, e.g. in tire services and garages. When selecting a reciprocating compressor, please pay special attention to: what is the required amount of compressed air? It depends on the type and quantity of the equipment in the workshop. what tank size do we need? It affects the switching frequency of the compressor. The larger the tank is, the longer the working time is. The big advantage of reciprocating compressors is their simple construction, mobility, and low cost of investment.