Showing 13–24 of 27 results
The K18 chip cone with a diameter of Ø 20 x 38 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
The K18 chip cone with a diameter of Ø 25 x 50 mm and a thread of 3/8″ is designed for the roughening of the outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No….
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8″ thread is designed for roughening the inside and outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK…
The K18 buffing wheel with a diameter of Ø 50 mm and a 3/8″ thread is designed for roughening the inside and outside of lorry, agricultural and oversized vehicle tyres. Recommended max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat. No. 519-6610), arbour MK…
K18 pencil rasp with a diameter of Ø 5 – 8 x 105mm designed for roughening rubber on the outside of passenger car and lorry tyres. Recommended max. speed 4,500 rpm. Suitable for: – 6 mm drill chuck, – NV 11 hexagonal tool holder (cat. No. 519-6672) – arbour MK 1 for flexible shaft (cat….
The encapsulated wire brush with a diameter of Ø 50 x 7 mm and a hole of 3/8″ is designed for roughening rubber on the outside of lorry tyres and on the inside of passenger car and lorry tyres. Recommended max. speed 2,800 rpm. Ideal for visible lines of steel cord in all-steel lorry tyres…
The cylindrical steel brush with a diameter of Ø 76 x 8 mm is designed for roughening rubber on the outside of passenger car, delivery van and agricultural vehicle tyres. Recommended max. speed 2,800 rpm. Ideal for visible steel cord lines in all-steel lorry tyres and textile cords. Suitable for use with: 8 mm drill…
The K18 rotor saw with a diameter of Ø 50 x 5 mm and a thread of 3/8″ is designed for roughening the outside of all passenger car, lorry, agricultural and oversized vehicle tyres. Recommened max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat….
The K18 rotor saw with a diameter of Ø 50 x 10 mm and a thread of 3/8″ is designed for roughening the outside of all passenger car, lorry, agricultural and oversized vehicle tyres. Recommened max. speed 4,500 rpm. Suitable for: 595-4034 drill chuck, NV 11 hexagonal tool holder with 3/8″ thread – 24 (cat….
The steel brush with a diameter of Ø 8 x 25 mm is designed for roughening the rubber on the outside of all types of tyres. Recommended max. speed 2,800 rpm. Ideal for visible lines of steel cord in all-steel lorry tyres and textile cords in agricultural twill tyres. Suitable for use with a 6…
A cylindrical steel brush with a diameter of Ø 76 x 20 mm and a bore of 14 mm is intended for roughening rubber on the inner side of all types of tyres.Recommended max. speed 2,800 rpm. A perfect solution for visible steel cord lines in all-steel truck tyres and textile cords. Suitable for: 8…
The K46 buffing wheel with a diameter of Ø 65 mm and a 3/8″ thread is designed for roughening the inside of passenger car tyres. Recommended max. speed 4,500 rpm. Suitable for use with: 595-4034 drill chuck, NV 11 hexagonal tool holder with a 24mm 3/8″ thread (cat. No. 519-6627), arbour MK 1 for flexible…
End of content
End of content